The Kythera has been the most eagerly anticipated products from PolarStar in the past decade. This HPA system is a radical departure from all previous...
The JACK™ was designed to answer the demand for an affordable, high performance HPA (High Pressure Air) conversion for AEG's. The system is a drop-in ...
Winner of the "Best HPA Engine" in the 9th Airsoft Players Choice Awards, the dual solenoid design of the F2™ provides the same functionality as the l...
The Fusion Engine™ was released in 2011 and was the first new HPA system to hit the airsoft market in over two decades. This is the system that starte...
The Drop In Kit will include the following:Special Polarstar JACK engine designed for the kit, with JACK FCUCustom 3D printed RESIN Chassis for the JA...
This PolarStar M249 Hollow Grip Bolt and Nut is what you would find included with your PolarStar HPA unit such as the Fusion Engine, Jack, F1, or F2. ...
The A&K SR-25 Spacer Kit comes with a delrin spacer which gets pressed into the front of the Fusion Engine's cylinder to make the Version 2 engine...
This spacer kit allows a V2 Fusion Engine to be used in the A&K and JG SR25 rifles. Since these models use an "V2 Long" gearbox, the standard V2 F...
This switchboard is designed to convert Ares V2 gearboxes equipped with their EFCS MOSFET system and is not compatible with other Ares gearboxes. The ...
This kit is required to mount the original bolt catch and spring found on VFC rifles to the side plate of the V2 Fusion Engine.Included:1x Shoulder Sc...
Highly flexible rubber air line reinforced with a nylon braided sheath promotes maximum mobility while reducing the risk of kinking.Standard air line ...
Our CO2 inserts are manufactured for both the UGS and CGS stocks and have models for both the 12g and 33g disposable CO2 cartridges in either variant....
If you are someone that has always wanted to have the performance and versatility of an HPA system but just couldn't bear the thought of being tethere...
The Compact Regulator High Pressure spring is compatible with both first and second generation Micro Regs as well as the UGS and CGS systems. Changing...
Forgot to put Loctite on your screws and they disappeared into the black abbess, eh? No worries! This screw set comes with all screws used in the Kyth...
The measured tip length should be within +/- 0.010" of an exiting nozzle to be compatible. If the tip length you measure does not match up to a produc...
This PolarStar Airsoft F2 Gold Low Flow Poppet is a highly anticipated efficiency upgrade that expands the capabilities of the F2 HPA Unit. This Gold ...
The F2™ poppet valve is available in two levels, Red and Gold. The Red valve is the standard valve that comes in the F2 and provides the maximum amoun...
The measured tip length should be within +/- 0.010" of an exiting nozzle to be compatible. If the tip length you measure does not match up to a produc...
This latest Revision 3 Fire Control Unit is for use with PolarStar JACKs, F1s, F2's and Fusion Engines (GEN 2 and Above).Key features of the 2017 R3 F...
Flow & Filtration: Our Filtered QD Fitting ensures that your HPA system receives only clean gas free from any particles that would be large enough...
This fitting is used in V2, V3 and M240 versions of the Fusion Engine. It is the internal fitting that threads into the engine's cylinder to which the...
Low Flow Poppet Valve for your PolarStar Fusion Engine.This poppet valve has a lower flow than the stock valve which results in the following performa...
The air nozzles for the Fusion Engine come in up to 6 different colours which identify how much the nozzle restricts air flow out of the engine. This ...
The R107 is the solenoid valve used in all current production Fusion Engines and is backwards compatible with all production engines back to the GEN1....